Carlson Quarryman Pro Page 26 User Manual Download | Manualshive

Page: 26 / 57

background image

P a g e |

26

and the inside of the transit case, before repacking the Quarryman Pro for storage.

To clean the lens windows and the red dot laser pointer window on the laser module, use HPLC-grade (> 99.8%)
acetone in combination with lint-free cotton wool buds or wipes.

NOTE

: repeated exposure to acetone may cause skin dryness or cracking. It is recommended that personal

protective equipment (PPE) such as eye-shields and/or face-shields as well as protective gloves is used when
dispensing and using HPLC-grade acetone.

5.4 Storage and transportation

Dry the system thoroughly before storing.

If the instrument remains unused for several weeks, it is advisable to remove power sources from the instrument.

Store within the environmental temperature limits of -25° C to +70° C.

Before transporting the Quarryman Pro system, pack the equipment correctly in the supplied transit case.

Secure the transit case to prevent the possibility of shock or vibration.

Do not allow the transit case to slide around inside transport vehicles or containers.

«
...
24
25
26
27
28
...
»

Summary of Contents for Quarryman Pro


























































Reviews:

No comments

Related manuals for Quarryman Pro

Brand: geos Pages: 3

Brand: Datalogic Pages: 2

Brand: Atid Pages: 13

Scanjet 7600 Series

Brand: HP invent Pages: 104

Brand: DAVID Pages: 37

Brand: MobileDemand Pages: 5

Brand: Lomography Pages: 171

Brand: Plustek Pages: 24

Brand: Xerox Pages: 64

Brand: Radio Shack Pages: 40

Brand: Jireh Pages: 41

Gryphon I GPS4400

Brand: Datalogic Pages: 52

Brand: Olympus Pages: 42

Brand: Unitech Pages: 14

HQ POWER EXTREME 250

Brand: Velleman Pages: 28

500F - CanoScan LiDE

Brand: Canon Pages: 2

Brand: Canon Pages: 66

Brand: Canon Pages: 4

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands