Carlson Pet Products 2 in 1 Super Wide Owner'S Manual Download Page 9

 To fold your Pet Yard

     Step 1

: 

To fold your Pet Yard begin by loosening all of the locking 

                    knobs so the Play Yard can move freely and becomes flexible 
                    at the joints.

     Step 2

Remove one of the locking knobs from the Pet Yard and 

                    remove one vertical tube.

     Step 3

: 

You will now be able to pull the two plastic joints and the top 

                    and bottom of the Pet Yard apart.

     Step 4

Fold and put away.

Care and Maintenance

8

Periodically check the 2-in-1 Pet Yard and Super Gate for signs of damage, 

wear, or missing components.

Do not use if any part is missing, worn or damaged.

Check the 2-in-1 Pet Yard and Super Gate regularly to ensure all the 

hardware and mountings are tightened.

Do not use abrasive cleaners or bleach.

Clean by sponging with warm water and a mild detergent.

90 Days Limited Warranty:

If, during the first 90 days after consumer purchase of the item, under 

reasonable and non-commercial use and conditions of maintenance, it fails 

while owned by the original purchaser because of the quality of materials or 

workmanship of finish and assembly, Carlson Pet Products LLC will replace or 

repair it at Carlson’s option.  PROOF OF PURCHASE REQUIRED.

Summary of Contents for 2 in 1 Super Wide













Reviews: