Carlson Pet Products 2 in 1 Super Wide Owner'S Manual Download Page 2

1

Assembly and Installation Instructions

Read and follow all instructions carefully to ensure that your Pet Gate is properly 

installed.  Improper installation could result in the gate becoming unstable or dislodged 

from the doorway.  Please keep these instructions for your reference.

The maximum width opening for this gate is 50.5 to 144 inches.

The four Wall Mounting Brackets must be used in securing the gate to the wall.  These 

brackets prevent the gate from dislodging from its opening and becoming unstable. If 

hardware mounting to a surface other than drywall or wood, please consult with a 

professional about installation. 

Contact Carlson for questions and replacement parts. 

For questions about the use of your pet gate, call our customer care line 952-435-1084.

Carlson Pet Products, Inc.

3200 Corporate Center Drive, Suite 105, 

Burnsville, MN 55306-9804,USA.

Made in China

WARNING:

• NOT recommended for use with children.  

• Install according to manufacturer’s instructions.

• To prevent serious injury or death, securely install gate or enclosure and use 

according to manufacturer's instructions. 

• Children have died or been seriously injured when gates are not securely installed. 

ALWAYS install and use gate as directed using all required parts. 

• Never stack gates on top of each other to form a taller barrier. This could result in 

serious injury or death.

• Intended for use with children between 6 and 24 months. 

• STOP using when a child or pet can climb over or dislodge the gate. 

• Use only with the locking/latching mechanism securely engaged. 

• To prevent falls, NEVER use at top of stairs. 

• NEVER use to keep child or pet away from pool.

• Always ensure the gate is resting against the floor before beginning installation. 

• This is a Pet Gate, but when used with children, the small pet door must remain 

closed and securely latched. 

• Strangulation hazard: pets can force themselves into very small openings; use this 

gate with pets whose heads will not fit into openings in the gate, between the gate 

and floor, or between the gate and wall. 

• This product will not necessarily prevent all accidents. NEVER leave child or pet 

unattended. 

• Check the gate regularly to see if all the hardware and mountings are tightened.

• Do not use if any components are missing or damaged.

• Adult assembly required.

Summary of Contents for 2 in 1 Super Wide













Reviews: