Page | 2
Thank you for purchasing a golf simulator impact screen and enclosure kit from
Carl’s Place! In this guide you will find everything you need to complete your kit
assembly, plus a few tips to help you make the best use of it.
Materials List
Literature
•
Assembly Manual & User Guide
•
Frame Assembly Sheet
Frame Components
•
(1) Kit of pipe connector fittings
•
(1) Kit of pre-cut and marked pipes
OR self-sourced, if pipes were not
purchased
Fasteners
•
(1) Bundle of ball bungees
•
Zip ties
Fabric Panels
•
(1) Ceiling panel (or split design)
•
(2) Wall panels (left and right)
•
(1) Impact screen
Safety Cushions
•
(1) Large bottom foam cushion
•
(1) Top foam cushion
•
(2) Side foam cushions
Optional Accessories
•
Projector/Electronics Mount(s)
•
Ceiling Baffle(s)
Tools Needed
•
6mm Hex Bit Socket and Ratchet
(recommended) or Hex Key
•
Step Ladder (8-ft recommended)
Assembly Overview
1.
Assemble Frame
2.
Attach Ceiling Panel
3.
Attach Electronics Mount(s)
(if applicable)
4.
Attach Baffles (if applicable)
5.
Attach Wall Panels
6.
Attach Impact Screen
7.
Attach Safety Cushions
Scan the QR code to see our full
assembly video.
