▲
▲
17
Programming
End of Programming
15
Digital Input Table
9
21
22
Digital output 2
on page 19
The list displaying the en. meters to be retransmitted
varies depending on the chosen setting of the
instrument, that is, depending on the “en. meter”
selection chosen among: “tot”, “tot-Prd”, “tot-
1.Cn”, “tot-2.Cn”, as reported in the table below:
I
F THE SELECTION IS
tot, tot-1.Cn, tot-2.Cn:
kWh (consumed)
kWh- (generated)
kvarh ind (cons. inductive)
kvarh -ind (gen. inductive)
kvarh CAP (cons. capacitive)
kvarh -CAP (gen. capacitive)
I
F THE SELECTION IS
tot-Prd
:
kWh tot (total energy meter)
kvarh tot (total en. meter)
kWh t1 (energy meter tariff 1)
kvarh t1 (energy meter tariff 1)
and so on for the other
tariffs t2-t3-t4.
E
XAMPLE OF
D
ISPLAY
Scroll the energy meters displayed by means of
and
choose the desired one by means of
, then the instru-
ment displays the page where the pulses to be associated
to the energy are indicated.
S
▼
▲
Select the number of pulses by
means of
(pulses/kWh from
1 to 100) and confirm with
. The
programming continues for digital
output 2.
S
▼
▲
S
▲
1.2..
..2.1
▼
