Carlo Gavazzi Controls S.p.A.
–
32100
–
Belluno
INFO: www.carlogavazzi-automation.com Phone +39.
0437 355811
User Manual
Modbus Master / SNMP Agent
Document code: SIU-SNM-01_ENG
Revision 1.0
2020-12-03
Page 19 / 25
At this point the configuration/firmware on the device is correctly update.
Note: When you install a new version of the software, if it is the first time it is better you do the
update of the Firmware in the SIU-SNM-01 device.
Note: When you receive the device, for the first time, you also have to update the Firmware in the
SIU-SNM-01 device.
Warning: If case a warning message appears when you try to do the Update try these points
before seeking assistance:
Try to repeat the operations for the updating;
Try with another PC;
Try to restart the PC;
Check the LAN settings;
If you are using the program inside a Virtual Machine, try to use in the main Operating System;
If you are using Windows Seven, Vista, 8 or 10 make sure that you have the administrator
privileges;
In case you have to program more than one device, using the "UDP Update", you have to
cancel the ARP table every time you connect a new device on Ethernet. For do this you have
to launch the "Command Prompt" and write the command "arp -d". Pay attention that with
Windows Vista, Seven, 8 or 10 you have to launch the "Command Prompt" with Administrator
Rights;
Pay attention at Firewall lock.