55
3.3.5 Setting Operation
Some of the Inverter parameters can be re-configured from the built in panel. To
chenge the paramaters select "Setting" from the main menu and then confirm by
pressing the "OK", as shown below. The standard selection is password protected.
The other settings such as the date, time, language, minimum start voltage,
start-up time, buzzer ON/OFF, communication baud rate, and RS485 address, are
not password protected. The interface protection standard change: DK5940,
VDE 0126, or RD1663, shall be carried out by qualified and professional service
staff. For this purpose a specific password ie required.
When the setting change is
completed, the inverter must be restarted to have the new settings effectively
executed.
The parameters that can be re-configured from the panel are described as
follows:
Date:
Date setting.
Time:
Time setting.
Language:
Display language selection.
Start V:
Adjust the minimum startup voltage.
Start Sec:
Set the delay time at start-up.
Alarm:
Turn "ON" or "OFF" the buzzer.
Standard:
Interface protection standard setting according to
local/national requirements.
Baudrate:
Set the communication serial port baud rate.
RS485 Addr:
Set the RS485 address.
Auto Test:
Perform auto-test function. (Only for ISMG315IT and
ISMGT320IT)
Summary of Contents for ISMG 315
