DISxRSE Car Park Display
– Configuration manual
21
Connect display and PC to a local area network (LAN)
The display and PC can be connected to a LAN via a network device such as a
router
or a
switch.
The display IP address must be set according to the network parameters.
Step
Action
1
Connect the DISxRSE to the local network.
2
Connect the PC to the local network.
3
Once they are connected,
power on
the DISxRSE.
4
The
display IP address
will be shown on the screen.
Take note of this number.
5
Set a static/dynamic IP address to the PC with the
same IP class
and
subnet mask
of the display.
See the procedures in this manual