DISxRSE Car Park Display
– Configuration manual
20
Procedures
This part describes how to connect to the display through an Ethernet connection
Connect display and PC with an Ethernet cable
If the devices you want to connect do not have access to a LAN or if the router does not have
the DHCP server enabled, use an Ethernet cable to make a direct connection between the
display and the PC.
Step
Action
1
Connect an
Ethernet cable
to the DISxRSE Ethernet port.
2
Connect the other plug to the PC Ethernet port.
3
Once they are connected,
power
the DISxRSE
on
.
4
The
display IP address
will be shown on the screen.
Take note of this number.
5
Set a static IP address to the PC with the
same IP class
and
subnet mask
of the
display.
See the relevant procedure in this manual