READ ALL INSTRUCTIONS BEFORE OPERATING THIS BINKS PRODUCT.
IMPORTANT! DO NOT DESTROY
It is the customer's responsibility to have all operators and service personnel read and understand this manual.
Contact your local Binks representative for additional copies of this manual.
The Trophy HVLP Series of Spray
Guns can be used to operate
at high transfer efficiencies in
compliance with “California South
Coast Air Quality Management
District” regulations as a High
Volume, Low Pressure spray gun.
Binks Trophy Series Touch-up Gravity Spray
Gun is the premier spray gun for use in gravity
feed touch-up and light production spray
applications and sets a new standard in
durability, ergonomics, and atomization.
The lightweight ergonomic design offers
unsurpassed comfort and control. The latest
advanced atomization technology has been
incorporated for achieving consistent, fine
finishes when spraying a wide range of
industrial coating applications.
Binks Trophy Series Touch-up Gravity Spray
Guns are offered in two different atomization
technologies: HVLP and LVMP.
SPECIFICATIONS
Maximum Air Pressure
100 psi / 6.9 bar (P-1)
Gun Body
Anodized Aluminum
Fluid Path
Stainless Steel
Fluid Inlet Size
7/16 – 14(f)
Air Inlet Size
1/4" NPS / BSP(m)
Gun Weight (less cup)
12 oz. / 348 grams
Wetted Parts (gun)
Stainless Steel & PTFE
Wetted Parts (cup)
Aluminum and Plated Brass
II 2 G X
“TROPHY” SERIES TOUCH-UP SPRAY GUNS
GRAVITY FEED HVLP & LVMP
(1466-XXXX-XXX)
77-3043-R5 (8/2020)
1 / 14
www.carlisleft.com
EN
SERVICE MANUAL