Carlisle Binks AG360 Series, Service Manual

Page: 2 / 28

EN
P2 = Cylinder Air Pressure
P1 = Max Fluid Input Pressure
P2 = Cylinder Inlet
P1 = Fluid Inlet Size
SPECIFICATIONS
Anodised Aluminium
WEIGHT WITH MANIFOLD
1/4" NPS
1/8" NPS
110 x 62 x 44
SCREW TYPE MANIFOLD CONNECTIONS
820g
DIMENSIONS WITH MANIFOLD
Stainless Steel
Tungsten Carbide
Seals and O-Rings
Gun Body Material
Fluid Needle and Seat Construction
Max Ambient Operating Temperature 40°C Nominal [104°F]
MATERIALS OF CONSTRUCTION
Gun Head and Fluid Passageways Stainless Steel
275 bar [4000 psi]
4 - 10 bar [58 psi - 145 psi]
Tip Holder Material
Anodised Aluminium
HDPE, FEPM
L x H x W mm
WEIGHT
FUNCTIONAL DESCRIPTION
FLUID AND AIR INLET PRESSURES
The AG364 Airless gun is designed to be fast change-over, modular construction applicator for spray
finishing on machines and fixed mountings.
Intended for most types of general industrial coatings and fine finishing operations, the gun features
a stainless steel head suitable for both water based and solvent based applications.
It is mounted on a screw attached low profile stainless steel manifold which can remain in position on
the machine while the gun is removed for maintenance or cleaning operations.
The gun is designed as a flexible solution for the modern coating applicator with multiple accessories
available to further optimise the process.
ENVIRONMENTAL
SB-E-2-646 R1.1
2/28
www.carlisleft.com