Model 601GAS burner — Instruction manual
MN601GAS 012516
– 4 –
Where appliance instructions differ from this manual, follow the appliance instructions.
601GAS burner at-a-glance . . .
1
Burner gas connection, 1" or 1¼" NPT
2
Air tube (flange omitted for clarity), with powder coat paint finish
3
Flame rod/insulator assembly
4
Combustion head
5
Gas saddle connection gasket
6
Gas manifold
7
Ignition electrode/insulator assemblies
8
Motor (with permanently-lubricated bearings and thermal overload protection)
9
Hinged burner flange door – for access and removal of combustion head/gas manifold
assembly
10
Ignitor (Carlin Model 41000 solid state electronic ignitor – 14,000 volts, continuous duty
rated)
11
Hinged cover plate (for access to blower wheel & electrodes)
12
Airflow proving switch — Prevents burner from firing if air is not moving
13
Air damper – Only a single adjustment required for setting combustion air; see page 9
for starting setting based on input
14
Door interlock switch – prevents burner operation if flanged door is open
15
Primary control – Carlin Model 60200FR microprocessor-based interrupted ignition flame
supervisory control (flame rectification)
16
Burner junction box (installer electrical entrance)