Warranty:
Carl Martin Research warrants the manufacturing, material and proper operation for a period of one
year from date of purchase. Carl Martin will replace defective parts, make necessary repairs or replace the
unit at the discression of our technicians. The warranty applies only to the original purchaser of this product,
and excludes any damage or faulty operation resulting from misuse, neglect or unauthorized service.
HandMade in Denmark
East Sound Research Raadmandsvej 24 8500 Grenaa Denmark Phone: +4586325100
E-Mail: [email protected]
Specifications
Input……..........……........ 1M Ohm
Output………………........ 100 Ohm
S/N Ratio......................... 68 dB
THD distortion.................. 0,1%
Frequency range.............. 40 hZ - 16kHz
Delay Min........................ 20 m.sec
Delay max....................... 1200 m.sec
Dimensions .................... 186 (W) x 120 (D) x 55 (H) mm
7.31” (W) x 4.72” (D) x 2.16” (H)
Weight............................. 820g / 1,81lbs
Power Requirements
The EchoTone comes with a built in mains power supply, that deliver inte-12V regulated
Power consumption: 2,1Watts.
The EchoTone will be delivered either in 100 or 115 or 230 VAC 50/60 Hz versions depending on the country’s
requirements
PLEASE NOTICE: If the EchoTone is purchased in USA (115V) it can not be used in country’s where 230V is
used, you will burn the built in transformer.
With the TRAIL switch positioned on the back just beside the input jack you
choose you you want trails on or off when bypass.
Trails are the echo ringing out when you bypass the unit, in off position the
effect stop immediately when bypass.
