Use of resin
!
Be careful about resin from contacting skin or body part.
-
If in contact, rinse in running water and make sure to wear gloves during work.
Replacement of resin
Lifetime of optical engine
3
!
Remove alien substances and scraps at the bottom of tray.
- Remaining scraps may have adverse effects on the output.
!
After replacing resin, stir well before use since precipitates can be formed.
Cleaning of build plate and tray
!
Check for alien substances and scraps on build plate and tray every time.
- Remaining scraps may have adverse effects on the output.
- Regular management and cleaning of tray are necessary.
!
Coating can be damaged if the tray is cleaned with a sharp object.
- Use a spatula or dry cotton cloth as cleaning tool.
!
Poor cleaning can lead to poor quality of output and lifting or cracking of floor.
Lifetime of optical engine lamp is 3,000 ours, and brightness of the lamp can be
reduced by exceeding its lifetime. Replace the lamp after using it for 3,000 hours
to increase quality of output.
Preparation for
A/S
request
Record error situation, interior of the printer, and LCD display as photograph or
video.
- A/S can be much easier if the user explains the situation clearly.