Ch3. System Control
9. Printing Option
1) Temporary Check on Mold
While printing, check ‘Temporary Check on Mold’ on the printing mode screen
and press Pause to check the output.
Press Pause again to return to previous printing position and restart printing.
This function cannot be used if printing is progressed over 140mm.
Summary) Temporary Check on Mold -> Click Pause -> Check the mold ->
Click Pause -> Restart printing
2) Auto Exit
While printing, check ‘Auto Exit’ item on the printing mode scree. Power of the
optical engine and the program are turned OFF automatically once printing is
done.
* In case of the optical engine, power is turned OFF after 20 seconds ~ 2
minutes for stabilization.
Summary) Auto Exit (check) -> Printing complete -> Run Auto Exit function
34