260 BSA
14
To start and perform a cut follow these
points:
a) Tension the machine , by button “1” verify
tension presence trhough light “2”
b) Select the cutting angle (90°/45°/60°)
acting on the rotating support through the
service key.
c) Select cutting speed (33-66 m/1’)
through button “3”.
d) Activate the blade rotation by button
“4”.
e) The bow feed can be set through the
handle
“A” (BOW FEED)
on the Hydraulic
pump.
f) The pressure can be set through the
knurl knob
“B” (CUTTING PRESSURE)
on
the Hydraulic pump.
A PICTURE ON THE HYDR. PUMP PLATE
GIVES GENERAL INSTRUCTION ON HOW
TO REGULATE THE 2 COMMANDS.
FOR MORE INFORMATION FOLLOW PAR.
4.2.
4.1 Cutting Operation
4. Operation
Before starting the machine, verify that installation has been performed correctly.
An emergency device “6”, is placed on the front part of the machine and can be
activate in any case of emergency.
A
B
4
3
1
7
5
6
2
Summary of Contents for 260 BSA
Page 2: ...260 BSA...
