211083
6
Vedpak 104GB_Version 2_040909
GB
ACTIvATINg COMPONeNTs OUT Of THe
veHICle’s eleCTRICAl sysTeM
By using the tip together with the auxiliary ground
lead, components can be activated, thereby
testing their function.
Connect the negative auxiliary clip to the
negative terminal of the component being tested.
Contact the probe to the positive terminal of
the component, the LED indicator should light
GREEN indicating continuity through the
component.
While keeping an eye on the green LED indicator,
quickly depress and release the power switch
forward (+). If the green indicator changed
instantly from GREEN to RED you may proceed
with further activation. If the green indicator went
off at that instant or if the circuit breaker tripped,
the Cargo 211083 has been overloaded. This
could happen for the following reasons:
• The contact is a direct ground or negative
voltage.
• The component is short-circuited.
• The component is a high amperage
component (i.e., starter motor).
Connect the
negative auxiliary
clip
Connect the tip to
the positive terminal
of the bulb
Press the power
switch forward to
activate the bulb
