7
The steering wheel is powered with 2 type ‘AA’ 1,5 V batteries (not included).
WARNING: The batteries must always be replaced by and adult person.
WARNING: Never leave batteries or tools within the baby’s reach.
WARNING: Never leave this product exposed to rain - water and humidity may damage the electrical
circuits.
WARNING: Always remove worn out batteries from this product, to eliminate possible leaks that may
damage the product.
WARNING: Remove the batteries if this product is not used for a longer period of time.
WARNING: Alkaline batteries are recommended for use with this product.
WARNING: Never use different battery types at the same time, nor use old and new batteries at the same
time.
6
ASSEMBLY INSTRUCTION
Moving on a ride-on is done by pushing off the ground with your feet. Movement of the steering wheel to
the left / right allows you to change the direction of travel.
To assemble the ride-on wheel, turn it upside down with the chassis. Install the steering rod in the
appropriate place (1). Then turn the ride over and mount the steering wheel on the tie rod. Fasten the
handlebar with the bolt, put on the nut and tighten with a screwdriver. Install the backrest to the rear of
the vehicle (2). Make sure the backrest is firmly mounted. Then mount the pusher handle on the backrest
and armrests.
(3) Turn the vehicle over with the chassis upwards and install the footrest by inserting it in the appropri-
ate holes and locking it by sliding it in the mounting sockets.
7
BATTERY USE INSTRUCTIONS
The ride-on car is equipped with the function of making sounds. To use this feature,
open the battery compartment cover in the steering wheel, insert 2 1.5V AA batteries according to the
polarity markings inside the compartment and close the cover (4).
