PadScan HD 2
Caresono Technology Co., Ltd
25
7.2.1 Probe cleaning
（
1
）
Check the probe for signs of damage, such as leaking. If any sign of damage appears, stop
using the probe and contact CARESONO for service immediately.
（
2
）
Use a soft cloth dampened with isopropyl alcohol (or an appropriate hospital cleaning agent)
to wipe the probe until it is thoroughly cleaned.
7.2.2 Probe maintenance
（
1
）
Must not hit and drop the probe.
（
2
）
It is recommended to only use ultrasound gel which FDA listed or cleared. If the ultrasound
gel doesn't qualify, it will damage the probe and stimulate the skin.
（
3
）
Clean the probe each time after using it.
7.3 Battery usage and maintenance
（
1
）
For optimum performance, it is recommended to charge and completely discharge a new
battery two to three times before first use.
（
2
）
The battery can be charged and discharged for hundreds of times. When the work time
shortens apparently, please replace it with a new one.
（
3
）
Do not use, store and charge the battery near the fire.
（
4
）
Do not make the battery short circuit, protect the battery from damp; do not disassemble the
battery; do not drop and hit the battery.
（
5
）
The battery should be charged and discharged every two or three months to prevent the battery
from invalidation.
Note
: The full battery which has not been used for a long time will discharge slowly.
So you should charge the battery which has not been used for a long time before reusing it.
（
6
）
If the battery is deformed, discolored; getting hot; giving off an unusual odor; appearing any
other abnormal phenomena, stop using the battery at once. Remove it from the device or the battery
charger and discard the battery according to the waste handling regulations.
