Page 30 of 52
RD-OI-48 A/0
Channel number
2.4GHz:
13 for 802.11b/g, 802.11n (HT20)
9 for 802.11n (HT40)
5GHz:
19 for 802.11a, 802.11n (HT20)
9 for 802.11n (HT40)
Date rate
802.11b: Max. 11Mbps
802.11a/g: Max. 54Mbps
802.11n: Max. 300Mbps (MIMO 2X2)
Modulation
802.11b: DSSS
802.11a/g/n: OFDM
Output power
Max. 17dBm
Security
64/128-bits WEP, WPA, WPA2, 802.1x
Antenna
Two dual band antennas (Detector: internal)
Antenna gain
3dBi
5.3
Initial Setting
Table 9 Initial setting of detector
Item
Description
IP address
192.168.68.1
Subnet mask
255.255.255.0
Country code
CN
ESSID
1500Cwexxxx-5G
(xxxx stands for four-bit number)
Network type
Infrastructure
Wireless mode
11(N only with 5GHz band)
Bandwidth
40MHz
Channel
149
Auth mode
WPA2PSK
Encrypt type
AES
WPAPSK(Password)
abcdefghij
Note:
1)
The value of ESSID/ WPAPSK of the detector and the wireless AP should be the same. Avoid
overlapping with other systems to prevent confusion.
2)
The wifi band and channel should comply with the local regulations. In several cases, wifi quality
is better in the 5GHz band compared to the 2.4GHz band. If possible and allowed in the country of
use, CareRay recommends using the 5GHz band.
3)
Country of use must be declared if wifi is used.