Troubleshooting:
Turn On/Off power:
•
After plug in the power cord to wall outlet, the kneading board will travel
up and down for 3 seconds to initiate the device. After initiation, you can
press the Power button on controller to turn on the massager.
•
After turning off the power on controller, the kneading board will
continue to travel up and down for 10 seconds and then stop completely.
Noise level:
•
The standard of noise level for shiatsu and swing back massager is 60db.
This massager has 55db noise level, which is acceptable.
•
The noise level can be measured by a sound meter. Keep the sound meter
30cm away from the massager and check its noise level.
Limited Warranty
Please contact seller for warranty. Limited warranty from manufacturer only for original
purchaser against defect related to manufacturing or workmanship under normal use.
Due to
the hygiene or rehabilitation nature of this product, it is non-returnable.
KH261
Made In China
Distributed by Q.L.M.
Carepeutic
®
is a registered trademark
All rights reserved. © Q.L.M.
www.ideaTomorrow.com
9
