4
09.16 207683 Rev100
OPERATING MANUAL
ON / OFF
Hold the button (On / Off) for two seconds to turn on or turn off the thermostat.
The word
“OFF” will be shown on the screen when the thermostat is turned off.
NOTE:
If the on-off remote contact is opened, the thermostat will show
“OFFd” on the
screen.
TEMPERATURE SETTING
Adjust the set point temperature (SETPOINT) by turning the center button.
SYSTEM MODES
Press the (Mode) button to toggle between the available operating modes.
Available operating modes:
Cold
– The screen will show the icon
Heat
– The screen will show the icon
Automatic
– The screen will show the word “Auto”, but the screen will show "Auto" but the
active mode at the moment will be indicated on the bottom of the thermostat.
Just fan
– The screen will show the icons and
CALIBRATION OF THE THERMOSTAT PROBE
Press FAN+ON/OFF and hold them to access in the thermostat menu.
For the calibrating of the probe we access with the password 22 to the PCAL option.
FAN VENTILATION / AUTOFAN
Press the button (Fan), to switch between auto fan or continuous ventilation fan.
Available fan modes:
With automatic fan
– The screen will show “Auto Fan”.
The fan works only when there is a request of cold or heat.
Without automatic fan
– The screen will show “Fan”.
The fan works in a continuous mode.
POWER SUPPLY
The thermostat can operate at 50Hz and at 60Hz, and the voltage tolerances are ± 20%.
AUTOMATIC
OPERATION
INTERIOR FAN
SELECTION
