Carel humiFog Touch, Installation Manual

Page: 13 / 40

13
ENG
humiFog Touch +0300113EN rel. 1.0 - 15.03.20221
4.3 Pumping station
4.3.1 Part numbers
humiFog multizone Touch models
U A * * * * * 5 0 *
Range Flow-rate kg/h Model Power supply and approval Revision no. Customisation Pump type
UA:
humiFog 150: 150 kg/h 1: humiFog
multizone
Touch 2: 230 Vac 50/60 Hz, 1~, UL
U: 208 Vac 50/60 Hz, 1~, UL
M: 460 Vac 50/60 Hz, 3~, UL 5: Fifth
revision 0: Carel
0: Brass
300: 300 kg/h
1: Stainless steel
500: 500 kg/h
2: Silicone-free stain-
less steel
800: 800 kg/h
1K2: 1200 kg/h
Tab. 4.a
Notice: in accordance with the requirements of UL998 in the most recent edition.
4.3.2 Dimensions - inches
37.0
48.5
33
19
38.4
44.7
24.4
Fig. 4.e
4.3.3 Weight - lb
humiFog multizone Touch models Weight with/without packaging [lb]
UA150**500/UA150**501/UA150**502 229/ 207
UA300**500/UA300**501/UA300**502 231/ 209
UA500**500/UA500**501/UA500**502 253/ 231
UA800**500/UA800**501/UA800**502 280/ 258
UA1K2**500/UA1K2**501/UA1K2**502 278/ 256
Tab. 4.b
4.4 Opening the packaging
• check that the packaging is intact upon delivery and notify the carrier immediately, in writing, of any damage that may be due
to improper or negligent transport;
• move the pallet with the pumping station to the installation site before removing it from the packaging, lifting the box using
suitable lifting/handling equipment;
• place it near the position where it will be installed;
• remove the packaging.
IMPORTANT: make sure the load does not swing when lifting it.
4.4.4 Material supplied
After opening the packaging and removing the front panel, check that
the following are present:
• 1 cable gland (A) for the power supply cable;
• 1 cable gland (B) for the electric cable coming out of the pumping
station;
• 1 key (C) for opening the panels,
• NPT fittings (D)
• installation manual
A B C D
Fig. 4.f