14
E
D
A
C
B
<
10°
ENGL
ISH
humiDisk - +030222022 - rel. 2.0 - 15.01.2010
Fig. 2.z
Water connections on the humiDisk
65
2.8 Final operations
Make sure that all the wires are positioned properly inside the appliance as shown in Figs 2.t and 2.u.
For the humiDisk
65
check that the junction box is properly closed and positioned correctly, and that the
spring is tightened. The box must have the surface of the cover resting on the two surface locators, as
shown in Fig. 2.w.
Replace the air fi lter and tighten the three supporting screws;
•
adjust the direction of the outlets. To do this, loosen the screws that hold the diffuser on top of the
•
appliance; see position 1 in Fig. 1.a for
humiDisk
10
and position 5 in Fig. 1.b for humiDisk
65
: at the end
of the operation tighten the screw again.
check that the water connections have been carried out correctly. Open the water supply tap and check
•
that there are no leaks along the supply circuit.
Fig. 2.w
Fig. 2.v
Water connections on the humiDisk
10
