Carefree of Colorado
10
S
ETTING THE
S
YSTEM INTO
P
AIRING
M
ODE
Peripheral devices (such as remotes and smart devices with the Carefree Connects
app) must be paired to the BT12 Control Module.
There are two methods to set the system into pairing mode.
Using the Awning Retract Function:
1. Turn power to the awning ON.
2. Extend the awning. Note that the awning
does not have to be opened completely.
3. Retract the awning.
4. When the awning is fully retracted, press
and hold the retract switch for 3 seconds
and release.
The awning is now in pairing mode for 5
minutes.
5. The BT12 control module will automatically
pair to the device then go to working mode.
Using the Switches:
1. Turn the awning power switch to OFF.
2. Press and hold the extend switch.
3. While holding the extend switch, turn the power switch ON.
4. Continue to hold the extend switch for 3 seconds, then release.
NOTES:
The awning will remain in pairing mode for 5 minutes.
The module will pair to the physically closest unpaired device first. Repeat
the pairing steps for each additional device.
Refer to the Carefree Connects Mobile App manual for setting up and
pairing a smart device (such as a smart phone or tablet).
Multiple peripheral devices can be paired to the awning (maximum of 8).
o
Only one active BT Motion Sensor can be paired to the control module.
o
Only one active BT Remote can be paired to the control module.
o
Multiple mobile devices (smartphone or tablet) can be paired to the
control module but only 1 can be active at a time.