C
OMPASS
Installation
Manual
Carefree of Colorado
6
070035-001r1
13. On the back of the motor and idler heads, remove
the plastic retaining clip covers and discard.
14. Rotate the access covers up and snap into the
retaining clip openings.
15. Install the hole plugs in the front channel:
15.1. From the back of the channel, insert the plug into the hole.
15.2. Twist to lock into place.
S
ECURING THE
F
ABRIC
1.
Roll the awning in and out several times to make sure that the fabric rolls up straight.
2. Attach the canopy in the awning rail using one #6 x 3/8" hex head
screw on one side of the awning. Place screw through awning rail,
fabric and polyrod approximately 1” in from the end of the fabric.
3.
On the opposite side, pull the fabric tight in the awning rail place one
#6 x 3/8" hex head screw on one side of the awning. Place screw
through awning rail, fabric and polyrod approximately 1” in from the
end of the fabric.
Fabric
1"
#6 x 3/8
Screw
Polyrod
LG008
Awning Rail
Hole Plug
(2 per arm)
Place Plug
in Hole
Twist to
Lock in Place
View Inside of Arm Channel
Alt005
Back of Motor Head
Back of Idler Head
Alt007
Clip Cover
Clip Cover
Access
Cover
Access
Cover
