CareCo RR07135 Usage And Maintenance Instructions Download Page 3

www.careco.co.uk

CareCo, Hubert Road, Brentwood, Essex, CM14 4JE

Lavenham & Weymouth Tables - 

RR07135/RR07136

RR07135 - Weymouth Tilt-Top Overbed Table

A

B

To disassemble do the exact opposite of the assembly instructions.

•  Always check the status of the mechanical parts to guarantee they are used in total safety.
•  Check the device is properly assembled. Pay particular attention to the locking of the knobs.

•  Do not exceed the maximum load capacity.
•  Make sure that the floor surface supporting the overbed table is level.
•  Make the adjustment operations without load.
•  Check all components are well fixed.
•  Always assist the patient during the elevation operation

The assistant must place and adjust the overbed table with the maximum care to avoid sudden movements or dangerous 

oscillations. An assistant has to check any movement of the patient.

Check the structure periodically: the correct positioning of the tubes, the connections, the hooks, and the complete

tightening of screws and / or terminals.

Use a damp cloth or a solution of lukewarm water and neutral soap. Do not use abrasive substances, acids,alkali, alcohol, 

chlorine-based cleaners, disinfectants and acetone when cleaning,because these substances cause the abrasion of the plastic 

surfaces and rusting of the metal surfaces.

The manufacture company is not responsible for any damage caused by using materials that can damage the product surface 

or corrosive chemicals during cleaning.

If you need to disinfect the product, use a common delicate disinfectant neutral detergent.

Tighten the handle to lock at the required height. By turning 

the handle (fig. 2) the big tray can rotate. Tighten the handle 

again to lock it at the required inclination.

By pulling the handle (A) the tray will lift up automatically. Pushing 

on the tray, it will come down. Tighten the lever to lock at the 

required height. By turning the handle (B), the tray can rotate. 

Tighten the handle again to lock it at the required inclination.

Disassembly

Before Use

Precautions For Use

How To Use

Maintenance

Cleaning and Disinfection

RR07136 - Lavenham Tilt-Top Overbed Table

fig. 2

Summary of Contents for RR07135

Page 1: ...nt and injury For proper use of the device refer to this manual For proper use of the device consult your doctor or therapist Keep the packaged product away from any source of heat because the packaging is made of cardboard The shelf life of the accessory is determined by the wear of parts that cannot be repaired and or replaced Be careful when children are nearby Do not exceed the maximum payload...

Page 2: ...am Weymouth Tables RR07135 RR07136 A Big screw 2pc B Small screw 1pc C Perforated plate 1pc D Tools 1pc E Base 1pc F Castors 4pc G Column 1pc RR07135 Weymouth Tilt Top Overbed Table Assembly Lavenham Tilt Top Overbed Table RR07136 A B C Note Do not remove the safety band before point 3 Assembly Weymouth Tilt Top Overbed Table RR07135 1 Unpack the product and check that the content matches with the...

Page 3: ...lete tightening of screws and or terminals Use a damp cloth or a solution of lukewarm water and neutral soap Do not use abrasive substances acids alkali alcohol chlorine based cleaners disinfectants and acetone when cleaning because these substances cause the abrasion of the plastic surfaces and rusting of the metal surfaces The manufacture company is not responsible for any damage caused by using...

Page 4: ...d by this warranty CareCo will at our discretion replace the product or supply parts to remedy This warranty does not cover device failure due to owner misuse or negligence or due to normal wear and tear The warranty does not extend to non durable parts If you have any queries please contact CareCo The manufacturer reserves the right to alter without notice any weights measurements or other techni...

Reviews: