1. Unpack the product and check the content matches with the description of the
parts in the manual.
2. Assemble the four castors by inserting them into the holes on the base.
3. Once this is done assemble the column onto the base using the tools provided.
4. Assemble the column onto the table by undoing the Knob on the column and the
2 screws underneath the table. Once this is done position the column into place
and slot each screw in and tighten with tools provided.
5. Now the overbed table is ready for use.
www.careco.co.uk
CareCo, Hubert Road, Brentwood, Essex, CM14 4JE
Lavenham & Weymouth Tables -
RR07135/RR07136
A. Big screw – 2pc
B. Small screw – 1pc
C. Perforated plate – 1pc
D. Tools – 1pc
E. Base – 1pc
F. Castors – 4pc
G. Column - 1pc
RR07135 - Weymouth Tilt-Top Overbed Table
Assembly - Lavenham Tilt-Top Overbed Table - RR07136
A
B
C
Note:
Do not remove the safety band before point 3.
Assembly - Weymouth Tilt-Top Overbed Table - RR07135
1. Unpack the product and check that the content matches with the description.
2. Assemble the four castors by inserting them into holes on the base.
3. Assemble column using the perforated plate, big screws and cylinder tube and lock them with the 17mm Spanner.
4. Unscrew the black screw on the column and replace with the smaller screw (B) provided.
5. Now the overbed table is ready for use.
Note:
Do not remove the safety band before point 3.
fig. 1