background image

2. IMPORTANT PRECAUTIONS

4

2.1 BEFORE DRIVING FOR THE FIRST TIME

Before take the first trip with mobility scooter, you should familiarize yourself well the operation of 

mobility scooter and with the operation elements. Please take your time to read this introduction 

booklet. 

 

»

Before driving, please evaluate the personal condition, and fully understand the operation of 

mobility scooter.

 

»

You should not assemble, maintain, and operate the mobility scooter before you read this 

instruction booklet.

 

»

Observe and obey all pedestrian rules and regulations in which you are riding.

 

»

Mobility device may only be used on the traffic routes for which it is approved in accordance 

with the relevant national legislation.

 

»

Always be aware of pedestrians and situations which might require extra care when using 

your scooter on public walk ways and footpaths.

 

»

Do not drive your scooter if you are under the influence of alcohol or medication that may 

affect your ability.

 

»

Try not to drive scooter at night.

 

»

Turn the key off before getting on or off (see section 4-1).

Please observe all relevant rules and regulations pertaining to pedestrians and

road users, at all times when you are driving the scooter.

 

»

Do not turn the power on before you get in and sit securely on the seat.

 

»

Be certain that the power is turned off when get in, get out. This will eliminate the 

possibility of accidentally activating the wigwag controls and causing injury.

 

»

Keep your weight toward the middle of the deck. Putting most or all of your weight 

on the edge of the deck may cause an unstable condition.

 

»

Only one person at a time could ride a Corvus Rapide Mobility Scooter. Do not 

carry passengers under any circumstances.

Practice Tips

 

»

If you are new to driving a scooter, it is a good idea to practice in a clear, safe space on a 

sound level surface. (I.e. Park, Playground).

 

»

Basic functions to practice

 

»

Wig wag accelerate /Wig wag release /Stop /Reverse /Turn /Ramp proceeding.

 

»

Set the speed control to its lowest speed, slightly increase the speed when you are getting 

familiar with the scooter. ( Refer to 4-2 for speed adjustment)

Practice operating your scooter in the presence of an attendant. Remember that only 

with practice will you become a competent driver. Practice these basic functions until 

you feel that you have control of your scooter.

Summary of Contents for Corvus Rapide

































Reviews: