| User Manual - NC0270 Triton Wheelchair
8
Maintenance:
•
Check all tyres for wear and damage at regular
intervals, at least annually. Change the tyres as soon
as there is any sign of damage or wear.
•
Check the seat and back upholstery for wear and
damage at regular intervals, at least annually. Change
these items as soon as there is any sign of damage
or wear.
•
Check all frame and backrest components for wear
and damage at regular intervals, at least annually.
Change these items as soon as there is any sign of
damage or wear.
•
Check the brakes for wear and damage at regular
intervals, at least annually. Check that they are
working properly and are easy to use. Change the
brakes as soon as there is any sign of damage or
wear.
•
Check to make sure all bolts are secure at regular
intervals, at least annually. All screws which are
critical to using the wheelchair safely have safety
nuts. Safety nuts should only be used once and
should be replaced after use.
•
Please use only mild household cleaners when your
wheelchair is dirty. Use only soap and water when
cleaning the seat upholstery.
•
Depending on the frequency and type of use,
we recommend taking your wheelchair to your
authorised dealer regularly, but at least within a year,
to have it maintained by trained personnel.
!
CAUTION
Sand, salt and sea water can damage the bearings of
the front and rear wheels. Clean and dry the wheelchair
carefully, after they have been exposed to these
elements.
Hygiene
When the chair is to be reused, it should be prepared
carefully, and be wiped and treated with spray
disinfectant on all surfaces which could come into contact
with the user. If you need to do this quickly, you must use
a liquid, alcohol-based disinfectant suitable for medical
products and devices.
Troubleshooting
If wheelchair pulls to one side:
•
Check tyre pressure
•
Check to make sure wheel turns easily
(bearings, axle)
•
Check the castor angle
•
Check to make sure both castors are making
proper contact with the ground or castors
may begin to wobble
•
Check to make sure all bolts are secure;
tighten if necessary
•
Apply small amount of lubrication to spots
where movable parts come in contact with
one another
•
Check to see if rear wheels are adjusted
differently
•
All parts are available through Care Quip,
who hold spare parts specifically for this
model
Manufactured and Distributed in
Australia By:
Care Quip
PO BOX 6308
Silverwater NSW 1811
02 9711 1111
[email protected]
