4. Wait a few seconds until the
blue
LED on the BTA II begins
flashing every three seconds.
Congratulations!
You have now paired your headset and BTA
II and are ready to begin using them!
Using the Cardo BTA II
Before you beginAs a first step,
connect the Audio cable of the
BTA II to your mobile phone’s
2.5 mm headset jack
.
If your phone does not have a standard 2.5mm headset jack,
you may need to purchase a suitable conduit connector to connect
the BTA II to your particular phone. A Pop-Port connector for Nokia
phones is included in your retail box.
To use a connector, first plug the connector into your mobile phone
then plug the audio cable of the BTA II into the connector.
For more information, visit our website at
www.cardowireless.com
.
3. Power On / Power Off
Power On:
Press and hold the
On/Off
Button for 3 seconds,
until you see 3 rapid
blue
flashes of the LEDs.
Power Off:
Press and hold the
On/Off
Button for 3 seconds,
until you see 3 rapid
red
flashes of the LEDs.
If the BTA II is already paired to your Bluetooth headset
(Section 2)
:
1. Turn on your Bluetooth headset and the BTA II. The
BTA II will begin flashing
blue
once every second while
it connects to the headset.
2.
Once connected, the BTA II will begin flashing blue
every 3 seconds.
You are now ready to use your
BTA II and Bluetooth headset!
NOTE:
The BTA II will shut off automatically after 5 minutes if it
is not paired to a headset or if it is unable to find the headset
you are trying to pair it to.
4. Placing calls
USING YOUR PHONE’S KEYPAD:
1. Dial the number you wish to call on your phone’s keypad
and press
SEND/TALK
on your phone.
2. The call will be sent to the headset, and you may will
communicate using the headset instead of the mobile
phone.
USING VOICE COMMAND / VOICE DIAL:
(if supported by your phone)
1. Tap the headset’s appropriate button to dial a call using
Voice Dial (CTRL button at Cardo headsets).
2. At the prompt, speak pronounce the
Voice Tag
of the party
you wish to call.
Please refer to your phone’s manual for more information on its
Voice Dial
feature.
TIP:
If your phone supports
Voice Dialing,
yet it does not
respond to the
Answer/End button
as described above, please
refer to
Section 6: Enhancing Functionality of the BTA II.
5. Receiving or ending calls
1. Tap
the
headset’s
Answer/End
button
to
Answer
or
End
a
call.
2. If this does not
Answer/End
the call, then you must do so
manually by using your phone’s keypad.
Please refer to
Section 6: Enhancing Functionality of the
BTA II
for instructions on how to enable this feature (subject
to the phone's capabilities).
