Contents of the Retail package:
•
BTA II
•
Travel charger
•
Pop-Port
TM
connector for Nokia phones
•
Velcro pad
•
This Quick Start Guide
NOTE: Quick Start Guides in other
languages can be downloaded from
our website.
•
Stylus for SET pinhole
•
Warranty and Registration card
•
Double sided scotch
®
tape
Getting Started with the Cardo BTA II
1. Charging your adapter
NOTE: You must fully charge the BTA II prior to
initial use!
1. Connect the enclosed AC Adapter to an electrical outlet,
and the cable of the AC Adapter into the charging port of
the BTA II. Charging begins when the
red
light (LED) turns
on.
2. Once charging is complete, the
red
LED will shut off.
Allow for no less than 3 hours for to completea a full charge
before initial use of the BTA II.
NOTE:
When the BTA II battery is low, the red LED will start
flashing every 3 seconds.
2. Pairing your adapter
Since you are using your BTA II for the first time, you must
pair
it to with your Bluetooth headset to make it work. If your BTA II
is part of a
Combo
retail box along with a Cardo headset, then
you can skip this section, since the headset and BTA II are
already factory paired.
TypicallyNormally you should only once have to perform
pairing between any particular headset and the BTA II.
Thereafter the devices remain paired until you cancel the
existing pairing or assign a new device to the BTA II.
1. Turn on the BTA II by pressing and holding the
On/Off
button for 3 seconds, until you see 3 rapid
blue
flashes of
the LEDs.
2. Follow the instructions in the headset’s manual to put the
headset into Pairing mode. (If you are using the
Cardo
scala-500
headset, this is done by pressing in and holding
the headset's MFW until the
red
and
blue
LEDs begin
alternating rapidly.)
3. Press and hold the SET button of the BTA II for 5 seconds
by inserting the enclosed Stylus gently into the BTA's
pinhole marked SET. When the LEDs begin rapidly flashing
rapidly
red
and
blue
, you may release the set button. The
BTA II is now in pairing mode.
Velcro pad
Pop-Port connector for
Nokia phones
Double sided
scotch tyape
Stylus for SET
pinhole
Double sided
scotch tyape
Stylus for SET
pinhole
