CARDIOSTRONG EX20, Assembly And Operating Instructions Manual, Page: 13 / 48

13
2.3 Assembly
Before assembly, take a close look at the individual assembly steps shown and carry out the assembly
in the order given.
L
NOTICE
+ First loosely screw all parts together and check that they fit properly. Tighten the screws
using the tool only when you are instructed to do so.
Step 1: Assembly of the Rear Stabilizer
1. Remove the washers (J1), spring washers (J2) and nuts (J3) fron the rear stabilizer (C).
2. Mount the rear stabilizer (C) to the main frame (A) with the preinstalled screws and previously
removed washers (J1), spring
washers (J2) and nuts (J3).
Step 2: Assembly of the Central Support Tube
1. Remove the screws (J4), spring
washers (J2) and washers (J1)
from the main frame (A).
2. Connect the sensor cables A1
and B1.
࣑ ATTENTION
Make sure not to pinch the
cables.
3. Mount the central support tube
(B) to the main frame (A) with the
previously removed screws (J4),
spring washers (J2) and washers
(J1).