CARDIOSTRONG CST-FX90-T, Assembly And Operating Instructions Manual

Page: 19 / 48

B10
A37
19
Step 7: Alignment of the Feet
If the floor is uneven, you can stabilize the equipment by turning the setting screws under the main
frame.
1. Lift the equipment on the desired side and rotate the setting screws under the main frame.
2. Rotate the screws clockwise in order to remove them and to raise the equipment.
3. Rotate them counterclockwise in order to lower the equipment.
Step 8: Connecting the Equipment to the Mains Supply
࣑
ATTENTION
The equipment must not be connected to a multiple socket, otherwise it cannot be guaranteed
that the equipment will be supplied with sufficient power. Technical errors can result.
Plug the power plug into a wall outlet that complies with the instructions in the chapter on electrical
safety.