CARDIOSTRONG CST-EX60, Assembly And Operating Instructions Manual

Page: 16 / 52

EX 60
16
Step 5: Assembly of the pedal bars and connection of the pedal tube with the console mast
1. Remove pre-mounted screws (J7), spring washers (J2) and washers (J3). Attach iron bracket(H3)
to right pedal tube and mount with screws (J7), spring washers (J2) and washers (J3).
2. Repeat point 1 on the left side with the iron bracket (H3).
3. Mount the console tubes to the pedal tubes. Adjust the fitting position using the four pre-drilled
holes and using the pins (G3).
⚠ CAUTION
+ Make sure to tighten the pin (G3) in order to avoid falls.
+ For safety reasons, we recommend adjusting the left and right sides of the handles to the
same height.