BC
60
25
3.3
Turning On and Setting the Equipment
1. Connect monitor to the power or press RESET for three seconds and the LCD display will show
all segments with a long beep (1-second-long) and display, i. e., 78.0 (software version) (see fig.
1 and 2).
2. With the +/- buttons, the user can select the programs User 0 to 4 and confirm with MODE
(see fig. 3 to 4). Then set the user data SEX, AGE, HEIGHT and WEIGHT. Press +/- to select the
corresponding values (see fig. 5 to 8). Confirm the settings with MODE.
Figure 1
Figure 3
Figure 5
Figure 7
Figure 2
Figure 4
Figure 6
Figure 8
Summary of Contents for CST-BC60
