CARDIOSTRONG CST-BC60, Assembly And Operating Instructions Manual

Page: 14 / 52

BC 60
14
2.3 Assembly
Before assembly, take a close look at the individual assembly steps shown and carry out the assembly
in the order given.
L
NOTICE
First loosely screw all parts together and check that they fit properly. Then tighten the screws
using the tool only when you are instructed to do so.
Step 1: Assembly of rear stabiliser
Mount the rear stabiliser (B) to the main frame (A) using two screws (N1), spring washers (N2),
washers (N3) and nuts (N4) and tighten the screws with the tool.
L
NOTICE
After completing
step 1
, if the floor/equipment is not even, turn the adjustable end cap to the
desired level in order to level the frame.