CARDIOSTRONG BALTIC, Assembly And Operating Instructions Manual, Page: 18 / 40

18
BALTIC
2.1.1 Filling and Emptying the Tank
⚠
CAUTION
+ The water in the tank must not be consumed and has to be disposed of after use.
࣑
ATTENTION
+ Only fill the tank with tap water. Do not use distilled water.
+ Do not fill the tank above its maximum capacity. This may void the warranty. The maximum
filling capacity can be found in the section on the Water level in this chapter.
+ To prevent algae formation, limescale and possible damage to the tank, we recommend the
use of chlorine tablets. Only use chlorine tablets for rowing machines.
1. Remove the fill plug from the upper tank
2. Fillingthe Tank: Place the funnel in the tank opening and fill the tank using the pumping siphon
or a measuring cup and a bucket.
3. Emptying the Tank: Place a bucket next to the rowing machine and pump the water with the
pumping siphon from the tank into the bucket.
4. After filling or emptying the tank, insert the fill plug into the tank and wipe off excess water
from the frame.
Water level
The water level indicator is located on the top of the tank. The minimum level for filling is predefined.
The resistance is determined by the amount of water in the tank.
࣑ ATTENTION
The maximum capacity is 17 litres. Do not fill the tank beyond its maximum value.