CardioMed Treadmills Operators Manual V 2.0
10
In order to check the alignment after the initialization, start the treadmill at 7 MPH/12Km/H
speed without standing on it for 2 minutes. Walk on the treadmill with medium speed for a
short period of time. Check if the belt moves to the middle surface without slipping. If it does
not repeat procedure.
Using the Treadmill
Step onto the treadmill only when it is stopped. Place each of your feet on the right and left-
edge margin of the treadmill. Start the treadmill manually or automatically as it is described
before. Step on the belt and start to walk. If you are operating the treadmill manually increase
or decrease the speed with the corresponding keys.
Begin to run slowly and increase the speed of the treadmill, do not try to stop the belt with your
legs .When you reach desired speed let go of the handle bar and run for as long as you wish.
When you want to stop running, decrease the speed or press the emergency off switch to
stop.
ATTENTION
If you must jump off the walking belt hold firm to the side or front handrails.
Always push the Stop Key when you want to stop the treadmill!!!
Do not step on the treadmill when the belt is moving.
Other Precautions
1. Do not touch the running belt with your hands when the belt is moving.
2. Hold the protective bars in the beginning and at the end of each exercise session, when
changing speed and before you push the Stop Button, because this results in stopping the
movement of the belt.
3. Use the treadmill only with one person at time.
4. When you use the treadmill wear suitable clothes and shoes.
5. When the belt is running do not step heavily and do not try to stop it, run with the same
speed.
6. If you feel dizziness, nausea, or you feel some other unusual symptom, stop exercising
and consult a doctor before you continuing.
