xr 600
20
9.
PROBLEMS AND SOLUTIONS
9.1.
The running belt stops and restarts
Control the belt tension
(see 3.11 best running belt tension)
because if belt is too loose or too much
lubricated it could slip.
9.2.
The running belt doesn’t keep center
The belt is too tight or user hangs on only one side handrail. (
See 3.10 how to center the running belt).
9.3.
Inclination doesn’t work
Check the fuse (8A retard for XR600) inside fuse box near the machine power switch. If it is o.k. contact the
constructor
(See chapter 1 recapitulation machine marking data).
9.4.
The general electric power switch doesn’t stay on
Problems on inverter or motor in short circuit. Contact the constructor
(See chapter 1 recapitulation machine
marking data).
9.5.
Noise from motor
Contact the constructor
(See chapter 1 recapitulation machine marking data).
9.6.
Noise from roller
It is necessary to change the roller because of bearings seat ruined. Contact the constructor
(See chapter 1
recapitulation machine marking data).
