background image

Program Operation

3.  AGE will scroll across center display.  Enter AGE using PROGRAM UP and DOWN buttons.  

Press ENTER.

4.  HEIGHT will scroll across center display.  Enter HEIGHT using PROGRAM UP  and DOWN but-

tons.  Press ENTER.

5.  WEIGHT will scroll across center display.  Enter WEIGHT using PROGRAM UP and DOWN but-

tons.  Press ENTER.

6.  WAIT will scroll across center display.
7.  At this time, User should firmly grasp the Pulse Handgrips.  The BODY FAT analysis will take 

approximately 10 seconds.

 

The calculated BODY FAT % will be displayed in the center display.  If the body fat analysis 
fails “----” will be displayed in the center display.

Note:  Keys Body Fat readings should be used to monitor individual body composition.  

These readings should be used as a guide only.  Keys Fitness recommends that you 
consult your physician for additional Body Fat testing and information.

  Never use the Body Fat function while using the following devices:  Medical elec-

tronic implants such as a pacemaker, Electronic life support systems, or portable 
electronic medical devices such as an electrocardiograph.

15

Summary of Contents for CZ-SG65
































Reviews: