Cardinal SCMF, Operator'S Instruction Manual, Page: 14 / 20

SECTION 3.0 Using the SCMF Test Board.
3.1 Introduction
The SCMF Test Board is designed to measure and reconfigure
the Multiple Frequency Output and Single Frequency Output family
of oscillators from Cardinal Components.
The SCMF Test Board consists of the following basic
components.
The 6 test SMA connectors, which can be used for frequency
measurement.
The I
2
C connector, which can be used by a microcontroller for
reconfiguring the Multi and Single output oscillators using I
2
C
Protocol.
Onboard EEPROM for storing custom configurations for easy
reconfiguration of the oscillator.