0031-M214-O1 Rev B
HS25KGP
UNPACKING
1.
Open box.
2.
Remove top Styrofoam insert from box.
3.
Next, remove S-hook from insert and set aside.
4.
Grasp scale and remove from box.
5.
Remove Pants (baby sling seat) from box.
6.
Remove bottom Styrofoam insert from box.
7.
Turn insert over to locate second S-hook.
8.
Remove S-hook from insert and set aside.
9.
Remove scale from plastic bag.
10.
Remove cardboard dowel between scale case
and lower loop.
11.
Scale is now ready to use.
OPERATION
1.
Referring to Figure No. 1, install S-hooks on scale.
2.
Unfold Pants (Baby Sling Seat).
3.
Hang Pants on lower S-hook. See Figure No. 1.
4.
Referring to Figure No. 2, turn Zero Adjust Knob
until dial pointer is reading “0”.
5.
Place baby in Pants.
6.
The dial pointer will indicate the baby’s weight.
7.
Remove baby from Pants and re-zero scale if necessary.
NEVER leave a baby unattended in the Baby
Sling Seat. Failure to maintain control of the
baby at all times while they are in the Baby
Sling Seat can result in serious injury to baby.
CARE AND CLEANING
DO NOT
spray; water directly on the scale.
DO
clean scale using a damp, soft cloth and mild detergent.
NOTE!
Some types of paper towels may scratch the dial lens.
DO NOT
use acetone, alcohol, or other volatile solvents for cleaning.
PARTS LIST
ITEM QTY PART
NUMBER
DESCRIPTION
1 4 6600-1870
Lens
Screw
2 1 6600-1871
Lens
3 2 6600-1872
S-Hook
4
1
HSPANT
Pants (Baby Sling Seat)
Zero
Adjust
Knob
Figure No. 1
Figure No. 2
