8529-M635-O1
y
DS-30
Page 2
KEY FUNCTIONS
This section describes the use of each of the keys on the DS Series Price Computing Scale. It
will be helpful to refer to the scale keyboard or the figure below when reading this section.
The membrane keyboard is not to be
operated with pointed objects (pencils,
pens, fingernails, etc). Damage to
keyboard resulting from this practice
will
NOT
be covered under warranty.
ZERO
The
ZERO
key is used to perform a variety of functions depending on the
current mode of operation:
Weight Display Mode (lb or kg annunciator on)
: Pressing the
ZERO
key will set
the weight display to zero and turn on the ZERO annunciator if the displayed
weight is within ± 2% of scale capacity.
Operational Setup Mode:
Pressing the
ZERO
key and then pressing the setup
parameter number on the numeric keypad while
CENTR
is displayed will enter
that setup mode.
TARE
Pressing the
TARE
key will store the current gross weight as the new tare
weight and change to the net weight mode.
UNITS
Pressing this key will display the current weighing units. To change to a different
weighing unit, press the
UNITS
key, then the corresponding key on the numeric
keypad for the weighing unit desired.
1
= kilogram mode (kg)
2
= 100g mode
3
= pounds mode
The currently selected weighing unit is indicated by illuminating and blinking the
kg, 100g or lb annunciator.
PRE
PACK
Pressing the
PREPACK
key after unit price is entered retains the unit price for
repetitive price computing. Tare entries are retained in PREPACK mode.
s
This is the Backspace key. It is used to clear the last digit entered when
entering the unit price.
CLEAR
ENTRY
The
CLEAR ENTRY
key is used to perform different functions depending on the
current mode of operation:
x
Data Entry
: The
CLEAR ENTRY
key is used to clear an incorrect entry
from the display without processing the data. If an incorrect entry is
made, press the
CLEAR ENTRY
key and re-enter the correct data.
x
Price Computing Mode:
Pressing the
CLEAR ENTRY
key while in the
price-computing mode will clear the unit price.
0 ~ 9
00
These keys are used to enter numeric data during normal operations as well as
during calibration and operational setup.
Summary of Contents for DS Series
Page 2: ...8529 M635 O1 y DS 30 Page 2 ...
Page 15: ...8529 M635 O1 y DS 30 Page 11 ...
Page 16: ...8529 M635 O1 y DS 30 Page 12 ...
