background image

Power-Up Initialization 

1. Turn the scale over and locate the removable panel on the bottom of the scale. 

2. Remove the panel to gain access to the battery holder. 

3. Install the included four (4) “AAA” size alkaline batteries. 

4. Place the scale on a flat level surface, such as a desk, table or bench. 

5. Lightly press on the scale to turn it on. 

6. The scale display will show 

oooo

, change to a moving 

o

 and then turn off.   

7. The scale has completed initialization and is ready for normal operation. 
 
 

Operation 

1. Step on the scale. 

2. The scale shows “0.0” during wake up and then shows the users weight. 
 

 

Fig. 1: Measured Weight Screens 

 

3. The weight is locked once a stable weight is obtained. 

4. If the user steps off the scale before a stable weight is obtained, the scale will display 

0.0lb/kg for 5 seconds, show a moving zero (see Fig. 2: below) and then the scale will 
automatically turn OFF. 

5. When the user steps off the scale after a stable weight is obtained, the users weight will 

be displayed for 5 seconds, then a moving zero will be shown (see Fig. 2: below) and then 
the scale will automatically turn OFF. 

6. If the user is still on the scale over 20 seconds, the scale will automatically turn OFF 

without showing the moving zero. 

 

Fig. 2: Moving Zero 

 

8525-M336-O1 Rev A 

 SlimPRO Operation 

Summary of Contents for Detecto SlimPRO













Reviews: