SETUP, CONT.
Crlf
(CARRIAGE RETURN LINE FEED OPTION)
Data sent from the serial port can be terminated with a single carriage return and either no line
feed or a single line feed command.
With display showing
CrlF
, press
MODE/ENTER/HEIGHT
key to show current setting. If
value displayed is acceptable, press
MODE/ENTER/HEIGHT
key to save it and proceed to
the next prompt. Otherwise, use the numeric keys to enter a new value 0 or 1 and then
press the
MODE/ENTER/HEIGHT
key to save it and proceed to the next prompt.
0
=
CLRF
is Disabled
1
=
CLRF
is Enabled
EOP
(END OF PRINT LINEFEEDS)
At the end of data sent to a printer, a pre-selected number of line feed commands can be sent
to space the paper in the printer to the desired position for withdrawal or for the next print.
With display showing
EOP
, press
MODE/ENTER/HEIGHT
key to show current setting. If
value displayed is acceptable, press
MODE/ENTER/HEIGHT
key to save it and proceed to
the next prompt. Otherwise, use the numeric keys to adjust the number of line feeds and
then press the
MODE/ENTER/HEIGHT
key to save it and proceed to the next prompt.
00
=
EOP
is Disabled
01
to
99
= The number of lines sent after End Of Print.
USB
(USB PORT FUNCTION)
With display showing
USB
, press
MODE/ENTER/HEIGHT
key to show current setting. If
value displayed is acceptable, press
MODE/ENTER/HEIGHT
key to save it and proceed to
the next prompt. Otherwise, use the numeric keys to select a new value 00, 01 or 02 and
then press the
MODE/ENTER/HEIGHT
key to save it and proceed to the next prompt.
00
= No Output (disabled)
01
= FORMAT “1” (Ticket Format)
¾
02
= FORMAT “2” (Journal Format)
¾
¾
Refer to the OUTPUT FORMATS section of this manual for more information on the
Ticket and Journal Formats.
NOTE:
This is a USB device port. It is assumed to connect to a USB HOST,
such as a PC only.
RS232
(RS232 PORT FUNCTION)
With display showing
rS232
, press
MODE/ENTER/HEIGHT
key to show current setting. If
value displayed is acceptable, press
MODE/ENTER/HEIGHT
key to save it and proceed to
the next prompt. Otherwise, use the numeric keys to select a new value 00, 01 or 02 and
then press the
MODE/ENTER/HEIGHT
key to save it and proceed to the next prompt.
00
= No Output (disabled)
01
= FORMAT “1” (Ticket Format)
¾
02
= FORMAT “2” (Journal Format)
¾
¾
Refer to the OUTPUT FORMATS section of this manual for more information on the
Ticket and Journal Formats.
0044-M380-O1 Rev A
y
ProDoc BFA Series
39