8527-0544-2M Rev G
APS Enterprise Scale
9
KEYPAD FUNCTIONS
DO NOT operate the keypad with pointed objects (pencils, pens, etc.).
Damage to keypad resulting from this practice is NOT covered under warranty.
The keypad of the APS Enterprise Scale has two keys,
ZERO (ON/OFF)
and
UNITS
which
have the following functions:
This is the
ZERO (ON/OFF)
key. It serves several purposes. First, when the scale
is off, pressing it will turn the scale ON. If the scale is already on, pressing and
holding it for approximately 3 seconds will turn the scale OFF.
Pressing this key when the scale is on will zero the scale.
This is the
UNITS
key. This key is used to change the weighing units to the
alternate units of measurement. For example, with pounds displayed, pressing this
key will change the weighting units to kilograms.
ANNUNCIATORS
The annunciators are turned on to indicate that the display is in the mode corresponding to the
annunciator label or that the status indicated by the label is active.
OZ
This annunciator is turned on to indicate the weight displayed is in ounces.
lb
This annunciator is turned on to indicate that the displayed weight is in pounds.
kg
This annunciator is turned on to indicate the weight displayed is in kilograms.
(STABLE)
This annunciator is turned on when the weight display is stable. When off, it means that the
change in successive weight samples is greater than the motion limits selected during setup.
0
(ZERO)
The (
0
) annunciator is turned on to indicate that the weight is /- 1/4 division of the
center of zero.
