Cardinal 6127 Series Operating Instructions Manual Download Page 18

8525-M310-O1 Rev E 

 612X Series and 633X Series 

14 

  

STATEMENT OF LIMITED WARRANTY 

 
Detecto Scale warrants its equipment to be free from defects in 
material and workmanship as follows:  Detecto warrants to the 
original purchaser only that it will repair or replace any part of 
equipment which is defective in material or workmanship for a 
period of two 

(2) years from date of shipment

.  Detecto shall be 

the sole judge of what constitutes a defect. 
 
During the 

first ninety (90) days 

Detecto may choose to replace 

the product at no charge to the buyer upon inspection of the 
returned item. 
 

After the first ninety (90) days,

 upon inspection of the returned 

item, Detecto will repair or replace it with a remanufactured 
product.  The customer is responsible for paying for the freight 
both ways.   
 
This warranty does not apply to peripheral equipment not 
manufactured by Detecto; this equipment will be covered by 
certain manufacturer’s warranty only. 
 
This warranty does not include replacement of expendable or 
consumable parts.  This does not apply to any item which has 
deteriorated or damaged due to wear, accident, misuse, abuse, 
improper line voltage, overloading, theft, lightning, fire, water or 
acts of God, or due to extended storage or exposure while in 
purchaser’s possession.  This warranty does not apply to 
maintenance service.  Purchased parts will have a ninety (90) day 
repair or replacement warranty only. 
 
Detecto may require the suspect product to be returned to the 
factory; item(s) must be properly packed and shipping charges 
prepaid.  A return authorization number must be obtained for all 
returns and marked on the outside of all returned packages. 
Detecto accepts no responsibility for loss or damage in transit. 
 
 

Summary of Contents for 6127 Series





















Reviews: