Cardinal Health Alaris 8000 Series, Directions For Use Manual

Page: 66 / 378

2-10
Getting Started
Alaris
®
System Directions for Use
Pump and Syringe Modules Section
NOTES:
€
The gripper control is spring loaded. When twisted to the
open position and then released, it (and the plunger grippers)
will return to the closed position.

The following are special Syringe Module features available
only with extension sets fitted with a pressure sensing disc:
(Reference "General Information", "Features and Displays" for
definitions.)
Auto Pressure
Back Off (upon occlusion)
Customizable Pressure Alarm Settings (see "Occlusion
Pressure" feature definition)
Dynamic Pressure Display (see "Pressure Tracking" feature
definition)
Fast Start
S
y
ringe Module
Slot in Pressure
Sensing Disc
Housing
Pressure
Sensing Disc
Fluid Side
Patient Side
SELECT
CHANNEL
OFF
PAUSE
RESTART
Pressure Sensing Disc
a. Orient pressure sensing disc, as follows:
• fluid side up (patient side down)
• cavity forward (membrane toward instrument)
b. Gently slide pressure sensing disc up into slot in
pressure sensing disc housing.
c. Apply firm upward pressure on pressure sensing disc
(not tubing) until disc snaps into place.
Loading (Continued)
Preparing Syringe and Administration Set (
Syringe Module
)
(Continued)
ALARM INFUSE STANDBY
CHANNEL
SELECT
CHANNEL
OFF
PAUSE
RESTART
RATE (mL/h)