Cardinal Health Alaris 8000 Series, Directions For Use Manual

Page: 122 / 378

2-66
Programming
Alaris
®
System Directions for Use
Pump and Syringe Modules Section
5. To begin multidose infusion, press
START
soft key.
• Main Display shows remaining
VTBI
for that dose.
• At completion of a multidose program,
MULTIDOSE
COMPLETE
appears on Main Display. 
6. To see detail screen during or between infusions, press
CHANNEL SELECT
key.
• During infusion, Volume Remaining displays.
• Between infusions:
♦
Number of doses completed and when next dose
starts displays.
♦
Yellow Standby Status Indicator illuminates.
Selecting Pressure Limit
1. Press
CHANNEL SELECT
key.
2. Press
OPTIONS
key.
SILENCE
OPTIONS
1
4
7
CLEAR
2
5
8
0
3
6
9
.
ENTER
CANCEL
SYSTEM
ON
Pump Module
CHANNEL
SELECT
CHANNEL
OFF
RESTART
PAUSE
ALARM
INFUSE STANDBY
NOTES:
€
Reference"Delay Options" procedure to program an infusion
delay. When delaying an infusion, a multidose cannot be
delayed for more than
8
hours, and all doses in the multidose
program must be completed within a
24
-hour program.

Syringe Module: If
NEOI
is enabled, the Near End of infusion
message appears near the end of the last dose.
Multidose Mode (Continued)
Volume/Duration Disabled (Continued)
CHANNEL
SELECT
CHANNEL
OFF
RESTART
PAUSE
ALARM
INFUSE STANDBY
ALARM
INFUSE STANDBY
CHANNEL
SELECT
CHANNEL
OFF
PAUSE
RESTART
RATE (mL/h)